top of page

Automate Big Ice Settings with the Morozko Forge App

Nov 1
6 min read
The Morozko Forge app open on a phone next to a Morozko Ice Bath, with the words Set up your ice bath in about 5 minutes.
The Morozko Forge app puts ice making, water temperature, and your Plunge timer on the phone in your pocket.

Summary

  • The new Morozko Forge app connects directly to your existing Meross digital controller to help you automate your settings.

  • Find the Android version in the Play Store.

  • Download TestFlight for the iPhone version.

  • No need to create an account.

  • From the Morozko app, you can read the water temperature, start or stop ice making, and set a hold temperature from anywhere you have internet.

  • Setup takes about five minutes, once, standing next to the bath with your WiFi password in hand. After that the controller runs ice making by itself, even with your phone off.


What You Need

Get your phone, have your home WiFi password ready (or the WiFi QR code from your router), make sure you're on a 2.4 GHz WiFi network (not 5G, not guest) and that you hold your phone within about 3 feet of the controller while it is locating the ice bath.


How to Get the App

The app is free. On iPhone it is listed in TestFlight, and on Android it is on Google Play, both under the name Morozko Forge.

Before you start: a phone with your home WiFi password, a 2.4 GHz network, and QR codes to get the Morozko Forge app for iPhone and Android.
Figure 1: Before you start, have your phone, your home WiFi, and a 2.4 GHz network. Scan the QR code for the phone you carry.

On iPhone

The iPhone version runs through TestFlight, Apple's free app for trying apps before they reach the App Store. Search the App Store for TestFlight and tap Get. Then open the Morozko TestFlight invite and tap View in TestFlight under Step 2. TestFlight opens on Morozko Forge: tap Accept, then Install.


On Android

Open Morozko Forge on Google Play, or search the Play Store for Morozko Forge, and tap Install.


Pairing the App With Your Bath

Stand next to the bath and keep the app open. There are six steps, and the whole thing takes about five minutes.


Tap Start setup

Two Morozko Forge app screens side by side.  Step 2 is the Welcome to Morozko screen listing your home WiFi, setup mode, and connect, with a Start setup button.  Step 3 asks to Allow location, with the note that it is only used while the app is open.
Figure 2: Step 2 is the Let's connect your bath screen, where the checklist names what you need and the Start setup button begins pairing. Step 3 asks for location, which the app uses only while it is open.

No account needed. The app opens on a screen headed Let's connect your bath. Your phone needs internet here, because it reserves the bath for you. The Guest badge at the top right is normal. If you already have a Morozko account, tap Guest, then Sign in first.


Allow location, which the app uses to fill in your WiFi name and to tune Ice Mode to the weather where the bath sits. Tap Allow, then While Using the App with Precise Location on. It is optional: Not now carries on and you type the network name yourself.


Enter your WiFi and put the controller in setup mode.

Two Morozko Forge app screens side by side.  Step 4 is the Your home WiFi screen with a network name field reading Home WiFi and a password field, plus a Continue button.  Step 5 shows a drawing of the white Meross controller with the instruction to hold plus and minus together for about 5 seconds until the WiFi symbol blinks.
Figure 3: Your network name fills in by itself, so you only type the password. Then hold + and - on the right side of the controller for about 5 seconds, until the WiFi symbol at the top right of the display blinks.

Your network name fills in by itself. Type the password, or tap Scan a WiFi QR code and point the camera at the code on your router's sticker. Leave Remember it on this phone ticked so your next bath will not need it, then tap Continue.

Then put the controller in setup mode: press and hold + and - together, the long button on the right, for about 5 seconds, until the WiFi symbol at the top right of the display blinks.


Already blinking? Nothing left to do except Tap Connect to my bath.


Join the bath, then tap Done.

Two Morozko Forge app screens side by side.  Step 6 is an iPhone prompt asking whether Morozko may join the WiFi network Meross underscore TH underscore 57F0, with Cancel and Join buttons.  Step 7 is a green checkmark reading Your bath is connected and ready to control from this app, with a Done button.
Figure 4: On iPhone your phone asks to join the bath's Meross network, so tap Join and then Allow. On Android the app finds the blinking bath by itself. When the checkmark says Your bath is connected, tap Done.

On iPhone, your phone asks to join the bath's network, whose name starts with Meross_: tap Join. It uses that network only for setup, then returns to your WiFi, and you may need to tap Allow so it can find local devices.


On Android, the app finds the blinking bath by itself; tap Connect when prompted.


Then let the app finish. It takes about a minute and needs nothing from you. When it says Your bath is connected, tap Done.


The Main Screens

Home shows each bath, its temperature, an Online badge, and a power control. Ice Mode holds your ice settings, and Hold temp sets one temperature. Ready by sets a time and temperature so ice is waiting. Plunge times your session, and Care shows when to rinse the filter and change the water. More holds Your bath, where you change your weather town and set your Morozko model.


The Morozko Forge app once connected: a list of what you can do, and the home screen showing the bath at 33.1 degrees Fahrenheit with an Online badge and power control.
Figure 5: Once you are connected, Home shows the water temperature, an Online badge, and a power control for each bath you have paired.

How to Adjust Your Ice Settings


Start making ice.

Tap Ice Mode, then Start making ice. The button reads Starting…, then becomes Stop Ice Mode. A snowflake turns by the bath's status, reading Cooling down to make ice at first, then Making ice. Tap Stop Ice Mode to stop.


Tell the app which Morozko you have.

The first time, it asks, because each makes ice at its own pace. Tap yours, then Next. Not sure? Tap Not sure and set it later from Which Morozko is it? on the card, or in More, then Your bath.


Set the weather.

If you allowed location during setup, the app already knows where your bath is. If not, it asks once: tap Allow, or tap Enter ZIP and type your code. Change the town later in More, then Your bath. Weather timing is for the US only; elsewhere the app times ice for a 70°F day.


Outdoors or indoors.

Ice Mode assumes the bath is outdoors, and a garage counts as outdoors. If it is inside, tap Indoors on the weather line and the ice is timed for a 70°F room.


Hold a temperature.

Tap Hold temp and pick a temperature with - and + or a preset. It goes to the bath by itself a second later, and the screen shows a checkmark and Holding. If Ice Mode is on, - and + only pick the number; tap Stop Ice Mode · hold at to switch it off.


Troubleshooting

If setup stops when the controller display is blank, when the app cannot connect, or when the WiFi password did not work, these three panels give the fix.
Figure 6: Three ways setup stops, and the fix for each. A blank controller needs the menu button held for about 5 seconds. A bath that will not connect usually needs Precise Location turned on. A WiFi password that fails can be retyped without starting over.

The controller display is blank.

The controller is switched off, so + and - do nothing. Press and hold the menu button at the top left for about 5 seconds until the screen lights up, then put it in setup mode.


The app cannot connect.

Set the app's Location permission to While Using the App with Precise Location on.


The WiFi password did not work.

The app asks whether the controller's WiFi symbol is blinking again. On iPhone, tap Yes, it's blinking, then retype the password so the app sends it again. On Android the app notices on its own. You do not need to start over.


Setup hangs on Joining your WiFi.

Retype the password and fix any typing errors. Your WiFi needs a 2.4 GHz band, because 5 GHz only will not work, and it cannot be a guest or office network that blocks devices.


Still not connected after about 2 minutes.

The app says Couldn't finish linking your bath. Tap Retype the WiFi password and try again.


More Than One Bath, Mutiple Accounts

Tap the three dots beside a bath's Online badge to rename it or remove it; the app confirms before removing. To add one, tap Add another bath and repeat the steps beside it.


You do not need an account. One lets you control your baths from another phone and keeps them if you change or reset this one. Tap Guest at the top right, then Create account.


Frequently Asked Questions

  • Is the app free?

    Yes.

  • Do I need the Meross app?

    No. The app connects your bath straight to Morozko's own server.

  • Which baths does it work with?

    Those with the Meross WiFi temperature controller. Look for Meross printed at the top of your controller.

  • What if my WiFi is 5 GHz only?

    It will not work. The bath needs a 2.4 GHz network, and it cannot be a guest network.

  • Does Ice Mode keep running with the app closed?

    Yes. The controller runs the cycle by itself.

  • Where do I get help?

    Tap Need help? in the app for answers to the step you are on, or call (480) 546-2768 or email media@morozkoforge.com, Monday to Friday, 9am to 5pm Phoenix time.


Morozko support details: (480) 546-2768, media@morozkoforge.com, Monday to Friday 9am to 5pm Phoenix time, and a note that baths with the Meross controller are compatible.
Need help? Call (480) 546-2768 or email media@morozkoforge.com, Monday to Friday, 9am to 5pm Phoenix time.
Morozko Minerals – Mineral Salts – Dealer
Buy Now

Comments


AdobeStock_95686072.jpeg

Subscribe to our science journal

Receive articles on the science & experience of cold plunge therapy.

+1 (602) 456-6338

Request a sales consultation

Horizontal_logo_color_FORGE LLC.png

Morozko maintains freezing cold temperatures and sanitizes your water without chlorine.  Unlike a cold tub, a cold plunge, or a cold shower, Morozko ice baths make their own ice.  Microfiltration and ozone disinfection ensure crystal-clear cold water, empowering daily cold plunge therapy practice year-round.  

​​

Morozko is designed to support a healthy lifestyle, not diagnose, cure, or prevent specific diseases or medical conditions.  Morozko ice baths are not medical devices, and have not been evaluated by the FDA. Seek medical advice from your physician before embarking on any program of deliberate cold exposure.

​

This website is for education and information purposes only.  Results may vary.

© 2026 by Morozko Forge 

bottom of page