Service Cleaning Instructions
Service Cleaning Checklist
Drain the Ice Bath.
Clean the Steel Tub.
Use Passivation kit to remove rust.
Remove and replace filter.
Wipe down inside of filter housing.
Purge and clean the plumbing lines.
Fill the Ice Bath back up.
Check bath, filter, and plumbing lines for leaks.
Test ozone output with ORP meter.
Test pH balance and adjust to 6.5 - 7.0.
Vacuum out the mech space including fins on the radiator.
Check the temperature of the Compressor.
Inspect wiring.
Test GFCI.
Check for and repair breaks in the tan lines.
Inspect lid and insulation. Repair with aluminum tape.
Wipe down deck, inspect and repair finishes.
Selecting the right filter
Top
Choose this filter cartridge if you filter looks like this:
Side
For removing debris from the water in the Original Morozko Forge, Pro and XL Ice Plunge models from 2024-present.
Choose this filter cartridge if you filter looks like this:
Top
Side
For removing debris from the water in all Morozko ice baths from 2019-2023.
Choose this filter cartridge if you filter looks like this:
Top
Side
For removing debris from the water in Morozko Ice Bath and Ice Plunge models from 2023-present.
Magic Eraser
Vinegar
Shop Vacuum
Passivation Kit
Aluminum Tape
100% Tung Oil
Garden Hose Connector
